- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q56R50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q56R50
$3,224.20
Out of stock
Out of stock
| Thrust Rating - output shaft: | 3410 | Motor Frame Size: | 56C |
|---|---|---|---|
| Input Bore (C Face): | 0.625 | Input Speed: | 1750 |
| Input Keyway (C Face): | 3/16 X 3/32 | Shaft Seal Material: | Nitrile |
| Efficiency: | 80 | Reducer Style: | Standard |
| Ratio: | 50:1 | Reducer: | Worm - Right Angle |
| Output Shaft Assembly Code: | R | Frame Size: | 56C |
| Mounting Style: | No Base | Input Diameter (in): | 0.625 in |
| Series Code: | Raider | Service Factor: | 1 |
| Ratio Range: | 50:1 | Output Diameter (in): | 1.375 in |
| Gear Type: | Worm | Input HP @ 1750 RPM: | 2.05 |
| Assembly: | Q-R | Model Code: | 325Q |
| Input Style: | C-Face Quill | Center Distance (in): | 3.25 |
| Output Key: | 5/16 X 2.88 | Product Type: | Worm Speed Reducer |
| Output RPM: | 35 | No. of Gear Reductions: | Single |
| Input RPM: | 1, 75 | Output Shaft Direction: | Right |
| Output Torque Rating (in-lb): | 3315 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
You haven't viewed at any of the products yet.