- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
262Q56L30
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q56L30
$1,641.21
Out of stock
Out of stock
| Thrust Rating - output shaft: | 2956 | Motor Frame Size: | 56C |
|---|---|---|---|
| Shaft Seal Material: | Nitrile | Ratio: | 30:1 |
| Input Keyway (C Face): | 3/16 X 3/32 | Input Speed: | 1750 |
| Efficiency: | 80 | Input Bore (C Face): | 0.625 |
| Reducer Style: | Standard | Output RPM: | 58.3 |
| Gear Type: | Worm | Input RPM: | 1, 750 |
| Input HP @ 1750 RPM: | 1.7 | Output Key: | 1/4 X 2.00 |
| Assembly: | Q-L | Output Shaft Assembly Code: | L |
| Output Diameter (in): | 1.125 in | No. of Gear Reductions: | Single |
| Service Factor: | 1 | Input Style: | C-Face Quill |
| Reducer: | Worm - Right Angle | Center Distance (in): | 2.62 |
| Frame Size: | 56C | Input Diameter (in): | 0.625 in |
| Series Code: | Raider | Ratio Range: | 30:01:00 |
| Product Type: | Worm Speed Reducer | Mounting Style: | No Base |
| Model Code: | 262Q | Output Shaft Direction: | Left |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 1, 295 lb | Output Torque Rating (in-lb): | 1833 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 45.74 LB |
| Packaged Length: | 16.3 Inches | Packaged Width: | 12.9 Inches |
| Packaged Height: | 12.9 Inches |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
Recently viewed
Out of stock
Out of stock
Out of stock
Out of stock
