- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
206Q56H10 107
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H10 107
$1,472.38
Out of stock
Out of stock
| Thrust Rating - output shaft: | 898 | Motor Frame Size: | 56C |
|---|---|---|---|
| Ratio: | 10:1 | Reducer Style: | Standard |
| Input Bore (C Face): | 0.625 | Efficiency: | 80 |
| Input Speed: | 1750 | Input Keyway (C Face): | 3/16 x 3/32 |
| Center Distance (in): | 2.06 | Product Type: | Right Angle |
| No. of Gear Reductions: | Single | Ratio Range: | 10:1 |
| Series Code: | Raider | Input HP @ 1750 RPM: | 2.46 |
| Mounting Style: | Shaft Mt | Input Style: | C-Face Quill |
| Frame Size: | 56C | Output Diameter (in): | 1.438 in |
| Service Factor: | 1 | Gear Type: | Worm |
| Input Diameter (in): | 0.625 in | Output Shaft Direction: | L or R |
| Output Shaft: | Hollow Bore | Overhung Load Rating (Output Shaft(lb)): | 1, 065 lb |
| Housing Material: | Cast Iron | Output Torque Rating (in-lb): | 805 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 30.00 LB |
| Packaged Length: | 10.69 Inches | Packaged Width: | 9.06 Inches |
| Packaged Height: | 10.5 Inches |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
Recently viewed
Out of stock
