- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
262Q56R60
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q56R60
$1,641.21
Out of stock
Out of stock
| Efficiency: | 80 | Shaft Seal Material: | Nitrile |
|---|---|---|---|
| Ratio: | 60:1 | Motor Frame Size: | 56C |
| Reducer Style: | Standard | Input Bore (C Face): | 0.625 |
| Thrust Rating - output shaft: | 3410 | Input Speed: | 1750 |
| Input Keyway (C Face): | 3/16 X 3/32 | Center Distance (in): | 2.62 |
| Output RPM: | 29.1 | Mounting Style: | No Base |
| Frame Size: | 56C | Input HP @ 1750 RPM: | 0.91 |
| Input Diameter (in): | 0.625 in | Output Key: | 1/4 X 2.00 |
| Series Code: | Raider | Assembly: | Q-R |
| Output Shaft Assembly Code: | R | Input Style: | C-Face Quill |
| Output Diameter (in): | 1.125 in | Service Factor: | 1 |
| Product Type: | Worm Speed Reducer | Input RPM: | 1, 75 |
| Model Code: | 262Q | Reducer: | Worm - Right Angle |
| Gear Type: | Worm | Ratio Range: | 60:01:00 |
| No. of Gear Reductions: | Single | Output Shaft Direction: | Right |
| Output Torque Rating (in-lb): | 1805 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)): | 1, 295 lb | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 56.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
Out of stock
