- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175UH40 100
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175UH40 100
$1,128.63
Out of stock
Out of stock
| Input Speed: | 1750 | Reducer Style: | Standard |
|---|---|---|---|
| Key Sq.: | 0.188 | Key Length: | 1.38 |
| Thrust Rating - output shaft: | 1144 | Efficiency: | 80 |
| Ratio: | 40:1 | Ratio Range: | 40:1 |
| No. of Gear Reductions: | Single | Center Distance (in): | 1.75 |
| Service Factor: | 1 | Input Style: | Shaft |
| Gear Type: | Worm | Product Type: | Worm Speed Reducer |
| Input Diameter (in): | 0.625 in | Input HP @ 1750 RPM: | 0.61 |
| Series Code: | Raider | Output Diameter (in): | 1.000 in |
| Mounting Style: | Shaft Mt | Output Shaft Direction: | L or R |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 1, 200 lb |
| Output Shaft: | Hollow Bore | Output Torque Rating (in-lb): | 634 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 21.00 LB |
| Packaged Length: | 10.69 Inches | Packaged Width: | 9.06 Inches |
| Packaged Height: | 10.5 Inches |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
Recently viewed
Out of stock
Out of stock
Out of stock
Out of stock
