- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325UR30
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325UR30
$2,816.27
Out of stock
Out of stock
| Key Length: | 1.63 | Shaft Seal Material: | Nitrile |
|---|---|---|---|
| Reducer Style: | Standard | Input Speed: | 1750 |
| Efficiency: | 80 | Thrust Rating - output shaft: | 3410 |
| Ratio: | 30:1 | Key Sq.: | 0.188 |
| Gear Type: | Worm | Input Keyway: | 3/16 X 1.63 in |
| Assembly: | U-R | Series Code: | Raider |
| Output Diameter (in): | 1.375 in | Input RPM: | 1, 750 |
| No. of Gear Reductions: | Single | Output RPM: | 58.3 |
| Output Shaft Assembly Code: | R | Product Type: | Worm Speed Reducer |
| Service Factor: | 1 | Model Code: | 325U |
| Center Distance (in): | 3.25 | Input Diameter (in): | 0.875 in |
| Ratio Range: | 30:01:00 | Reducer: | Worm - Right Angle |
| Mounting Style: | No Base | Input Style: | Solid Shaft |
| Output Key: | 5/16 X 2.88 | Input HP @ 1750 RPM: | 3.14 |
| Output Shaft Direction: | Right | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 3226 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb | UPC: | 6, 62288E+11 |
| Weight: | 71.00 LB |
Related products
6GWBPF1 159
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 159
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
Recently viewed
You haven't viewed at any of the products yet.