- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
262UR15
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262UR15
$1,622.79
Out of stock
Out of stock
| Thrust Rating - output shaft: | 2296 | Ratio: | 15:1 |
|---|---|---|---|
| Input Speed: | 1750 | Key Sq.: | 0.188 |
| Efficiency: | 80 | Reducer Style: | Standard |
| Key Length: | 1.63 | Shaft Seal Material: | Nitrile |
| Output Key: | 1/4 X 2.00 | Input Style: | Solid Shaft |
| Gear Type: | Worm | No. of Gear Reductions: | Single |
| Output Shaft Assembly Code: | R | Center Distance (in): | 2.63 |
| Ratio Range: | 15:1 | Output RPM: | 116.6 |
| Service Factor: | 1 | Product Type: | Worm Speed Reducer |
| Reducer: | Worm - Right Angle | Input Diameter (in): | 0.75 in |
| Mounting Style: | No Base | Input RPM: | 1, 75 |
| Input HP @ 1750 RPM: | 3 | Model Code: | 262U |
| Series Code: | Raider | Output Diameter (in): | 1.125 in |
| Assembly: | U-R | Input Keyway: | 3/16 X 1.88 in |
| Output Shaft Direction: | Right | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 1737 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 1, 295 lb | UPC: | 6, 62288E+11 |
| Weight: | 52.00 LB |
Related products
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.