- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325UL20
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325UL20
$2,816.27
Out of stock
Out of stock
| Key Sq.: | 0.188 | Efficiency: | 80 |
|---|---|---|---|
| Input Speed: | 1750 | Shaft Seal Material: | Nitrile |
| Reducer Style: | Standard | Key Length: | 1.63 |
| Ratio: | 20:1 | Thrust Rating - output shaft: | 3410 |
| Input Keyway: | 3/16 X 1.63 in | Output Key: | 5/16 X 2.88 |
| Input Diameter (in): | 0.875 in | Input RPM: | 1, 750 |
| Input HP @ 1750 RPM: | 4.28 | Mounting Style: | No Base |
| Input Style: | Solid Shaft | Ratio Range: | 20:1 |
| Series Code: | Raider | No. of Gear Reductions: | Single |
| Service Factor: | 1 | Gear Type: | Worm |
| Center Distance (in): | 3.25 | Assembly: | U-L |
| Product Type: | Worm Speed Reducer | Model Code: | 325U |
| Output Diameter (in): | 1.375 in | Output Shaft Assembly Code: | L |
| Reducer: | Worm - Right Angle | Output RPM: | 87.5 |
| Output Shaft Direction: | Left | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 3267 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| Housing Material: | Cast Iron | UPC: | 6, 62288E+11 |
| Weight: | 71.00 LB |
Related products
6GWBPF1 85.5
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 85.5
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
You haven't viewed at any of the products yet.