- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q56L60
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q56L60
$2,931.09
Out of stock
Out of stock
| Input Keyway (C Face): | 3/16 X 3/32 | Input Speed: | 1750 |
|---|---|---|---|
| Efficiency: | 80 | Reducer Style: | Standard |
| Shaft Seal Material: | Nitrile | Thrust Rating - output shaft: | 3410 |
| Motor Frame Size: | 56C | Ratio: | 60:1 |
| Input Bore (C Face): | 0.625 | Center Distance (in): | 3.25 |
| Product Type: | Worm Speed Reducer | Output Diameter (in): | 1.375 in |
| Mounting Style: | No Base | Service Factor: | 1 |
| Output Shaft Assembly Code: | L | No. of Gear Reductions: | Single |
| Input RPM: | 1, 750 | Ratio Range: | 60:1 |
| Assembly: | Q-L | Model Code: | 325Q |
| Input Style: | C-Face Quill | Frame Size: | 56C |
| Output RPM: | 29.1 | Reducer: | Worm - Right Angle |
| Input Diameter (in): | 0.625 in | Output Key: | 5/16 X 2.88 |
| Gear Type: | Worm | Series Code: | Raider |
| Input HP @ 1750 RPM: | 1.76 | Output Shaft Direction: | Left |
| Output Torque Rating (in-lb): | 3274 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.