- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180R40
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180R40
$3,224.20
Out of stock
Out of stock
| Input Speed: | 1750 | Ratio: | 40:1 |
|---|---|---|---|
| Thrust Rating - output shaft: | 3410 | Shaft Seal Material: | Nitrile |
| Reducer Style: | Standard | Efficiency: | 80 |
| Motor Frame Size: | 180TC | Input Bore (C Face): | 1.125 |
| Input Keyway (C Face): | 1/4 X 1/8 | Manufacturer Reducer Size: | 325 |
| Maximum Input HP: | 2.926 hp @ 1750 rpm | Mounting Style: | No Base |
| Output Diameter (in): | 1.375 in | Output Key: | 5/16 X 2.88 |
| Input Style: | C-Face Quill | Service Factor: | 1 |
| Output Shaft Assembly Code: | R | Input RPM: | 1, 750 |
| Series Code: | Raider | No. of Gear Reductions: | Single |
| Input Diameter (in): | 1.125 in | Reducer: | Worm - Right Angle |
| Input HP @ 1750 RPM: | 2.43 | Assembly: | Q-R |
| Ratio Range: | 40:01:00 | Model Code: | 325Q |
| Frame Size: | 180TC | Gear Type: | Worm |
| Product Type: | Worm Speed Reducer | Output RPM: | 43.7 |
| Center Distance (in): | 3.25 | Output Shaft Direction: | Right |
| Output Torque Rating (in-lb): | 3303 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.