- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q140LR10
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q140LR10
$3,224.20
Out of stock
Out of stock
| Input Keyway (C Face): | 3/16 X 3/32 | Reducer Style: | Standard |
|---|---|---|---|
| Input Speed: | 1750 | Ratio: | 10:1 |
| Thrust Rating - output shaft: | 2964 | Shaft Seal Material: | Nitrile |
| Motor Frame Size: | 140TC | Input Bore (C Face): | 0.875 |
| Efficiency: | 80 | Input Diameter (in): | 0.875 in |
| Series Code: | Raider | Frame Size: | 140TC |
| Product Type: | Worm Speed Reducer | Output Shaft Orientation: | LR |
| Output RPM: | 175 | Output Shaft Assembly Code: | D |
| Output Key: | 5/16 X 2.88 | Mounting Style: | No Base |
| Gear Type: | Worm | Input Style: | C-Face Quill |
| Output Diameter (in): | 1.375 in | Reducer: | Worm - Right Angle |
| Input RPM: | 1, 75 | Center Distance (in): | 3.25 |
| No. of Gear Reductions: | Single | Assembly: | Q-LR |
| Input HP @ 1750 RPM: | 7.23 | Ratio Range: | 10:01 |
| Service Factor: | 1 | Model Code: | 325Q |
| Output Shaft Direction: | Double | Output Torque Rating (in-lb): | 2700 in-lbs @1750 input RPM in/lbs |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb | UPC: | 6, 62288E+11 |
| Weight: | 75.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.