- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300Q180R20
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300Q180R20
$2,328.21
Out of stock
Out of stock
| Motor Frame Size: | 180TC | Reducer Style: | Standard |
|---|---|---|---|
| Input Speed: | 1750 | Input Keyway (C Face): | 1/4 X 1/8 |
| Thrust Rating - output shaft: | 3410 | Input Bore (C Face): | 1.125 |
| Ratio: | 20:1 | Efficiency: | 80 |
| Shaft Seal Material: | Nitrile | Manufacturer Reducer Size: | 300 |
| Maximum Input HP: | 3.95 hp @ 1750 rpm | Output Shaft Assembly Code: | R |
| Input Style: | C-Face Quill | Output Diameter (in): | 1.250 in |
| Frame Size: | 180TC | Output RPM: | 87.5 |
| Mounting Style: | No Base | Output Key: | 1/4 X 2.25 |
| Input HP @ 1750 RPM: | 3.6 | Product Type: | Worm Speed Reducer |
| Ratio Range: | 20:01 | Center Distance (in): | 3 |
| Input Diameter (in): | 1.125 in | Assembly: | Q-R |
| Reducer: | Worm - Right Angle | Service Factor: | 1 |
| Series Code: | Raider | Gear Type: | Worm |
| Model Code: | 300Q | No. of Gear Reductions: | Single |
| Input RPM: | 1, 75 | Output Shaft Direction: | Right |
| Output Torque Rating (in-lb): | 2454 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 987 lb |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 68.00 LB |
Related products
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
You haven't viewed at any of the products yet.