- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
237Q56H20 107
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56H20 107
$2,073.46
Out of stock
Out of stock
| Input Speed: | 1750 | Reducer Style: | Standard |
|---|---|---|---|
| Efficiency: | 80 | Ratio: | 20:1 |
| Motor Frame Size: | 56C | Thrust Rating - output shaft: | 2091 |
| Input Bore (C Face): | 0.625 | Input Keyway (C Face): | 3/16 x 3/32 |
| Input Diameter (in): | 0.625 in | Input Style: | C-Face Quill |
| Center Distance (in): | 2.38 | Frame Size: | 56C |
| Ratio Range: | 20:1 | No. of Gear Reductions: | Single |
| Mounting Style: | Shaft Mt | Product Type: | Worm Speed Reducer |
| Series Code: | Raider | Output Diameter (in): | 1.500 in |
| Input HP @ 1750 RPM: | 2.33 | Gear Type: | Worm |
| Service Factor: | 1 | Output Shaft Direction: | L or R |
| Overhung Load Rating (Output Shaft(lb)): | 1, 770 lb | Output Torque Rating (in-lb): | 1421 in-lbs @1750 input RPM in/lbs |
| Output Shaft: | Hollow Bore | Housing Material: | Cast Iron |
| UPC: | 6, 62289E+11 | Weight: | 47.00 LB |
Related products
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
Out of stock
