- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
237Q140L25
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q140L25
$1,469.59
Out of stock
Out of stock
| Efficiency: | 80 | Input Bore (C Face): | 0.875 |
|---|---|---|---|
| Ratio: | 25:1 | Input Speed: | 1750 |
| Motor Frame Size: | 140TC | Input Keyway (C Face): | 3/16 X 1.63 |
| Reducer Style: | Standard | Thrust Rating - output shaft: | 2091 |
| Center Distance (in): | 2.38 | Input Diameter (in): | 0.875 in |
| Input Style: | C-Face Quill | Ratio Range: | 25:1 |
| Series Code: | Raider | Mounting Style: | No Base |
| Output Diameter (in): | 1.125 in | Frame Size: | 140TC |
| Gear Type: | Worm | No. of Gear Reductions: | Single |
| Service Factor: | 1 | Product Type: | Worm Speed Reducer |
| Input HP @ 1750 RPM: | 1.97 | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 1, 770 lb | Output Torque Rating (in-lb): | 1454 in-lbs @1750 input RPM in/lbs |
| Output Shaft: | Shaft | Housing Material: | Cast Iron |
| UPC: | 6, 62289E+11 | Weight: | 39.50 LB |
| Packaged Length: | 12.3 Inches | Packaged Width: | 12.2 Inches |
| Packaged Height: | 11.6 Inches |
Related products
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.