- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
237Q140H10 107
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q140H10 107
$1,770.50
Out of stock
Out of stock
| Input Keyway (C Face): | 3/16 x 3/32 | Thrust Rating - output shaft: | 1820 |
|---|---|---|---|
| Reducer Style: | Standard | Motor Frame Size: | 140TC |
| Input Speed: | 1750 | Efficiency: | 80 |
| Ratio: | 10:1 | Input Bore (C Face): | 0.875 |
| Input HP @ 1750 RPM: | 3.56 | Service Factor: | 1 |
| No. of Gear Reductions: | Single | Product Type: | Worm Speed Reducer |
| Frame Size: | 140TC | Input Style: | C-Face Quill |
| Series Code: | Raider | Center Distance (in): | 2.38 |
| Gear Type: | Worm | Input Diameter (in): | 0.875 in |
| Mounting Style: | Shaft Mt | Ratio Range: | 10:01 |
| Output Diameter (in): | 1.500 in | Output Shaft Direction: | L or R |
| Output Shaft: | Hollow Bore | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 1, 770 lb | Output Torque Rating (in-lb): | 1172 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62289E+11 | Weight: | 47.00 LB |
| Packaged Length: | 10.69 Inches | Packaged Width: | 9.06 Inches |
| Packaged Height: | 10.5 Inches |
Related products
6GWBPF1 25.4
$2,775.20More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 25.4
6GWBPF1 85.5
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 85.5
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
Recently viewed
Out of stock
