- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175UR10
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175UR10
Out of stock
| Input Speed: | 1750 | Shaft Seal Material: | Nitrile |
|---|---|---|---|
| Ratio: | 10:1 | Key Sq.: | 0.1875 |
| Reducer Style: | Standard | Thrust Rating - output shaft: | 1098 |
| Efficiency: | 80 | Key Length: | 1.38 |
| Maximum Input HP: | 1.625 hp @ 1750 rpm | Manufacturer Reducer Size: | 175 |
| Input Style: | Solid Shaft | Service Factor: | 1 |
| Input RPM: | 1, 750 | Assembly: | U-R |
| Product Type: | Worm Speed Reducer | Center Distance (in): | 1.75 |
| Reducer: | Worm - Right Angle | Output Shaft Assembly Code: | R |
| Gear Type: | Worm | Output Diameter (in): | 0.875 in |
| Series Code: | Raider | Model Code: | 175U |
| No. of Gear Reductions: | Single | Mounting Style: | No Base |
| Input Keyway: | 3/16 X 1.50 in | Input Diameter (in): | 0.625 in |
| Ratio Range: | 10:01 | Input HP @ 1750 RPM: | 1.52 |
| Output Key: | 3/16 X 1.38 | Output RPM: | 175 |
| Output Shaft Direction: | Right | Output Torque Rating (in-lb): | 528 in-lbs @1750 input RPM in/lbs |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 740 lb |
| Output Shaft: | Solid Shaft | UPC: | 6, 62288E+11 |
| Weight: | 20.00 LB |
Related products
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
You haven't viewed at any of the products yet.