- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175UH10 014
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175UH10 014
$1,258.80
Out of stock
Out of stock
| Thrust Rating - output shaft: | 976 | Key Length: | 1.38 |
|---|---|---|---|
| Efficiency: | 80 | Reducer Style: | Standard |
| Input Speed: | 1750 | Input Torque: | 58.52 in-Lbs @1750 input rpm, 1 HP |
| Ratio: | 10:1 | Key Sq.: | 0.188 |
| Gear Type: | Worm | Output Diameter (in): | 0.875 in |
| No. of Gear Reductions: | Single | Input Style: | Shaft |
| Ratio Range: | 10:1 | Center Distance (in): | 1.75 |
| Input HP @ 1750 RPM: | 1.625 | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 175 in-Lbs @1750 input rpm, 1 HP in/lbs | Output Shaft: | Hollow Bore |
| Overhung Load Rating (Output Shaft(lb)): | 1, 200 lb | UPC: | 6, 62288E+11 |
| Weight: | 21.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.