- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
154Q56L10
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 154Q56L10
$1,058.11
Out of stock
Out of stock
| Input Bore (C Face): | 0.625 | Efficiency: | 80 |
|---|---|---|---|
| Shaft Seal Material: | Nitrile | Reducer Style: | Standard |
| Thrust Rating - output shaft: | 1001 | Input Speed: | 1750 |
| Input Keyway (C Face): | 3/16 X 3/32 | Ratio: | 10:1 |
| Motor Frame Size: | 56C | Model Code: | 154Q |
| Series Code: | Raider | Service Factor: | 1 |
| Input Diameter (in): | 0.625 in | Output Diameter (in): | 0.750 in |
| No. of Gear Reductions: | Single | Frame Size: | 56C |
| Input Style: | C-Face Quill | Input HP @ 1750 RPM: | 1.06 |
| Output RPM: | 175 | Ratio Range: | 10:01 |
| Output Shaft Assembly Code: | L | Assembly: | Q-L |
| Product Type: | Worm Speed Reducer | Gear Type: | Worm |
| Input RPM: | 1, 75 | Mounting Style: | No Base |
| Center Distance (in): | 1.54 | Output Key: | 3/16 X 1.25 |
| Reducer: | Worm - Right Angle | Output Shaft Direction: | Left |
| Output Torque Rating (in-lb): | 402 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 388 lb | Output Shaft: | Solid Shaft |
| UPC: | 6, 62288E+11 | Weight: | 21.00 LB |
Related products
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.