- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325UL15
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325UL15
$2,816.27
Out of stock
Out of stock
| Thrust Rating - output shaft: | 3364 | Reducer Style: | Standard |
|---|---|---|---|
| Key Sq.: | 0.188 | Shaft Seal Material: | Nitrile |
| Input Speed: | 1750 | Key Length: | 1.63 |
| Efficiency: | 80 | Ratio: | 15:1 |
| Service Factor: | 1 | Gear Type: | Worm |
| Model Code: | 325U | Product Type: | Worm Speed Reducer |
| Output Diameter (in): | 1.375 in | Center Distance (in): | 3.25 |
| Input RPM: | 1, 750 | Input Style: | Solid Shaft |
| Mounting Style: | No Base | Series Code: | Raider |
| Ratio Range: | 15:1 | Output Shaft Assembly Code: | L |
| Output Key: | 5/16 X 2.88 | Output RPM: | 116.6 |
| No. of Gear Reductions: | Single | Input Keyway: | 3/16 X 1.63 in |
| Input Diameter (in): | 0.875 in | Assembly: | U-L |
| Input HP @ 1750 RPM: | 5.42 | Reducer: | Worm - Right Angle |
| Output Shaft Direction: | Left | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 2980 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| Housing Material: | Cast Iron | UPC: | 6, 62288E+11 |
| Weight: | 71.00 LB |
Related products
6GWBPF1 85.5
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 85.5
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.