- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325UH40 200
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325UH40 200
Out of stock
| Key Sq.: | 0.188 | Key Length: | 1.63 |
|---|---|---|---|
| Input Speed: | 1750 | Ratio: | 40:1 |
| Efficiency: | 80 | Thrust Rating - output shaft: | 2574 |
| Input Torque: | 105.38 in-Lbs @1750 input rpm, 1 HP | Reducer Style: | Standard |
| Center Distance (in): | 3.25 | Ratio Range: | 40:1 |
| Output Diameter (in): | 2.000 in | Gear Type: | Worm |
| Input HP @ 1750 RPM: | 2.926 | Input Style: | Shaft |
| No. of Gear Reductions: | Single | Output Torque Rating (in-lb): | 43.7 in-Lbs @1750 input rpm, 1 HP in/lbs |
| Output Shaft: | Hollow Bore | Overhung Load Rating (Output Shaft(lb)): | 2, 275 lb |
| Housing Material: | Cast Iron | UPC: | 6, 62288E+11 |
| Weight: | 73.00 LB | Packaged Length: | 11.16 Inches |
| Packaged Width: | 7.88 Inches | Packaged Height: | 9.38 Inches |
Related products
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
Out of stock
