- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q56R20
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q56R20
$3,224.20
Out of stock
Out of stock
| Input Speed: | 1750 | Efficiency: | 80 |
|---|---|---|---|
| Reducer Style: | Standard | Ratio: | 20:1 |
| Input Bore (C Face): | 0.625 | Input Keyway (C Face): | 3/16 X 3/32 |
| Thrust Rating - output shaft: | 3410 | Shaft Seal Material: | Nitrile |
| Motor Frame Size: | 56C | Input Diameter (in): | 0.625 in |
| Ratio Range: | 20:1 | Output Key: | 5/16 X 2.88 |
| Service Factor: | 1 | No. of Gear Reductions: | Single |
| Series Code: | Raider | Output Shaft Assembly Code: | R |
| Output RPM: | 87.5 | Assembly: | Q-R |
| Input HP @ 1750 RPM: | 4.28 | Frame Size: | 56C |
| Product Type: | Worm Speed Reducer | Center Distance (in): | 3.25 |
| Gear Type: | Worm | Input Style: | C-Face Quill |
| Mounting Style: | No Base | Output Diameter (in): | 1.375 in |
| Model Code: | 325Q | Reducer: | Worm - Right Angle |
| Input RPM: | 1, 75 | Output Shaft Direction: | Right |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 3267 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
Recently viewed
You haven't viewed at any of the products yet.