- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q56L10
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q56L10
Out of stock
| Motor Frame Size: | 56C | Thrust Rating - output shaft: | 2964 |
|---|---|---|---|
| Input Speed: | 1750 | Reducer Style: | Standard |
| Ratio: | 10:1 | Input Bore (C Face): | 0.625 |
| Efficiency: | 80 | Input Keyway (C Face): | 3/16 X 3/32 |
| Shaft Seal Material: | Nitrile | Manufacturer Reducer Size: | 325 |
| Maximum Input HP: | 8.092 hp @ 1750 rpm | Service Factor: | 1 |
| Frame Size: | 56C | Gear Type: | Worm |
| Input HP @ 1750 RPM: | 7.23 | Input RPM: | 1, 750 |
| Assembly: | Q-L | Output Shaft Assembly Code: | L |
| Input Diameter (in): | 0.625 in | No. of Gear Reductions: | Single |
| Center Distance (in): | 3.25 | Series Code: | Raider |
| Reducer: | Worm - Right Angle | Model Code: | 325Q |
| Output Key: | 5/16 X 2.88 | Output Diameter (in): | 1.375 in |
| Output RPM: | 175 | Mounting Style: | No Base |
| Ratio Range: | 10:01 | Product Type: | Worm Speed Reducer |
| Input Style: | C-Face Quill | Output Shaft Direction: | Left |
| Housing Material: | Cast Iron | Output Torque Rating (in-lb): | 2700 in-lbs @1750 input RPM in/lbs |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
Recently viewed
You haven't viewed at any of the products yet.