- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180LR15
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180LR15
$3,224.20
Out of stock
Out of stock
| Efficiency: | 80 | Motor Frame Size: | 180TC |
|---|---|---|---|
| Reducer Style: | Standard | Input Speed: | 1750 |
| Shaft Seal Material: | Nitrile | Thrust Rating - output shaft: | 3364 |
| Input Keyway (C Face): | 1/4 X 1/8 | Ratio: | 15:1 |
| Input Bore (C Face): | 1.125 | Input Diameter (in): | 1.125 in |
| Series Code: | Raider | Mounting Style: | No Base |
| Output RPM: | 116.6 | Assembly: | Q-LR |
| Product Type: | Worm Speed Reducer | Center Distance (in): | 3.25 |
| Output Diameter (in): | 1.375 in | Gear Type: | Worm |
| Model Code: | 325Q | Reducer: | Worm - Right Angle |
| Output Shaft Orientation: | LR | Service Factor: | 1 |
| Output Key: | 5/16 X 2.88 | Input HP @ 1750 RPM: | 5.42 |
| Frame Size: | 180TC | Ratio Range: | 15:01 |
| Input RPM: | 1, 75 | No. of Gear Reductions: | Single |
| Input Style: | C-Face Quill | Output Shaft Assembly Code: | D |
| Output Shaft Direction: | Double | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 2980 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| Housing Material: | Cast Iron | UPC: | 6, 62288E+11 |
| Weight: | 75.00 LB |
Related products
6GWBPF1 36.6
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 36.6
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
Out of stock
