- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180L50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180L50
$3,224.20
Out of stock
Out of stock
| Input Keyway (C Face): | 1/4 X 1/8 | Input Speed: | 1750 |
|---|---|---|---|
| Thrust Rating - output shaft: | 3410 | Efficiency: | 80 |
| Ratio: | 50:1 | Reducer Style: | Standard |
| Shaft Seal Material: | Nitrile | Motor Frame Size: | 180TC |
| Input Bore (C Face): | 1.125 | Maximum Input HP: | 2.462 hp @ 1750 rpm |
| Manufacturer Reducer Size: | 325 | Ratio Range: | 50:1 |
| Input Diameter (in): | 1.125 in | Input HP @ 1750 RPM: | 2.05 |
| Output Diameter (in): | 1.375 in | No. of Gear Reductions: | Single |
| Series Code: | Raider | Assembly: | Q-L |
| Frame Size: | 180TC | Input RPM: | 1, 75 |
| Input Style: | C-Face Quill | Model Code: | 325Q |
| Output Key: | 5/16 X 2.88 | Mounting Style: | No Base |
| Service Factor: | 1 | Reducer: | Worm - Right Angle |
| Output RPM: | 35 | Center Distance (in): | 3.25 |
| Product Type: | Worm Speed Reducer | Gear Type: | Worm |
| Output Shaft Assembly Code: | L | Output Shaft Direction: | Left |
| Output Torque Rating (in-lb): | 3315 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
Recently viewed
You haven't viewed at any of the products yet.