- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180L15
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180L15
$3,224.20
Out of stock
Out of stock
| Efficiency: | 80 | Input Speed: | 1750 |
|---|---|---|---|
| Ratio: | 15:1 | Input Bore (C Face): | 1.125 |
| Motor Frame Size: | 180TC | Input Keyway (C Face): | 1/4 X 1/8 |
| Thrust Rating - output shaft: | 3364 | Reducer Style: | Standard |
| Shaft Seal Material: | Nitrile | Manufacturer Reducer Size: | 325 |
| Maximum Input HP: | 6.127 hp @ 1750 rpm | Output Diameter (in): | 1.375 in |
| Service Factor: | 1 | Product Type: | Worm Speed Reducer |
| Gear Type: | Worm | Center Distance (in): | 3.25 |
| Output RPM: | 116.6 | Input Diameter (in): | 1.125 in |
| Mounting Style: | No Base | Ratio Range: | 15:01 |
| No. of Gear Reductions: | Single | Output Shaft Assembly Code: | L |
| Frame Size: | 180TC | Reducer: | Worm - Right Angle |
| Model Code: | 325Q | Assembly: | Q-L |
| Input Style: | C-Face Quill | Input RPM: | 1, 75 |
| Output Key: | 5/16 X 2.88 | Input HP @ 1750 RPM: | 5.42 |
| Series Code: | Raider | Output Shaft Direction: | Left |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| Output Torque Rating (in-lb): | 2980 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
6GWBPF1 25.4
$2,775.20More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 25.4
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.