- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180H30 203
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180H30 203
$3,413.03
Out of stock
Out of stock
| Efficiency: | 80 | Ratio: | 30:1 |
|---|---|---|---|
| Thrust Rating - output shaft: | 2574 | Input Speed: | 1750 |
| Input Bore (C Face): | 1.13 | Reducer Style: | Standard |
| Motor Frame Size: | 180TC | Input Keyway (C Face): | 3/16 X 1.63 |
| Maximum Input HP: | 3.619 hp @ 1750 rpm | Manufacturer Reducer Size: | 325 |
| Input Diameter (in): | 1.125 in | Service Factor: | 1 |
| Product Type: | Worm Speed Reducer | Output Diameter (in): | 2.188 in |
| Input HP @ 1750 RPM: | 3.619 | Frame Size: | 180TC |
| Mounting Style: | Shaft Mt | Input Style: | C-Face Quill |
| Center Distance (in): | 3.25 | No. of Gear Reductions: | Single |
| Ratio Range: | 30:01:00 | Series Code: | Raider |
| Gear Type: | Worm | Output Shaft Direction: | L or R |
| Output Shaft: | Hollow Bore | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 3226 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 2, 275 lb |
| UPC: | 6, 62288E+11 | Weight: | 77.00 LB |
Related products
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
6GWBPF1 57
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 57
Recently viewed
You haven't viewed at any of the products yet.