- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180H30 112
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180H30 112
Out of stock
| Motor Frame Size: | 180TC | Input Bore (C Face): | 1.13 |
|---|---|---|---|
| Input Speed: | 1750 | Input Torque: | 130.34 in-Lbs @1750 input rpm, 1 HP |
| Input Keyway (C Face): | 3/16 X 1.63 | Ratio: | 30:1 |
| Reducer Style: | Standard | Thrust Rating - output shaft: | 2574 |
| Efficiency: | 80 | Ratio Range: | 30:1 |
| Center Distance (in): | 3.25 | Input Style: | C-Face Quill |
| Input HP @ 1750 RPM: | 3.619 | Frame Size: | 180TC |
| No. of Gear Reductions: | Single | Output Diameter (in): | 1.750 in |
| Gear Type: | Worm | Output Shaft: | Hollow Bore |
| Output Torque Rating (in-lb): | 58.3 in-Lbs @1750 input rpm, 1 HP in/lbs | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 2, 275 lb | UPC: | 6, 62288E+11 |
| Weight: | 77.00 LB | Packaged Length: | 11.16 Inches |
| Packaged Width: | 7.88 Inches | Packaged Height: | 9.38 Inches |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.