- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q180H20 112
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q180H20 112
Out of stock
| Motor Frame Size: | 180TC | Input Speed: | 1750 |
|---|---|---|---|
| Input Bore (C Face): | 1.13 | Input Torque: | 186.55 in-Lbs @1750 input rpm, 1 HP |
| Thrust Rating - output shaft: | 2574 | Reducer Style: | Standard |
| Efficiency: | 80 | Ratio: | 20:1 |
| Input Keyway (C Face): | 3/16 X 1.63 | Center Distance (in): | 3.25 |
| Input HP @ 1750 RPM: | 5.18 | No. of Gear Reductions: | Single |
| Output Diameter (in): | 1.750 in | Frame Size: | 180TC |
| Input Style: | C-Face Quill | Ratio Range: | 20:1 |
| Gear Type: | Worm | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 2, 275 lb | Output Shaft: | Hollow Bore |
| Output Torque Rating (in-lb): | 87.5 in-Lbs @1750 input rpm, 1 HP in/lbs | UPC: | 6, 62288E+11 |
| Weight: | 77.00 LB | Packaged Length: | 11.16 Inches |
| Packaged Width: | 7.88 Inches | Packaged Height: | 9.38 Inches |
Related products
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
Recently viewed
Out of stock
Out of stock
Out of stock
Out of stock