- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q140R60
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q140R60
$3,224.20
Out of stock
Out of stock
| Shaft Seal Material: | Nitrile | Input Speed: | 1750 |
|---|---|---|---|
| Ratio: | 60:1 | Motor Frame Size: | 140TC |
| Input Bore (C Face): | 0.875 | Thrust Rating - output shaft: | 3410 |
| Input Keyway (C Face): | 3/16 X 3/32 | Reducer Style: | Standard |
| Efficiency: | 80 | Mounting Style: | No Base |
| Output Key: | 5/16 X 2.88 | No. of Gear Reductions: | Single |
| Input Style: | C-Face Quill | Ratio Range: | 60:1 |
| Model Code: | 325Q | Output Shaft Assembly Code: | R |
| Assembly: | Q-R | Input HP @ 1750 RPM: | 1.76 |
| Input RPM: | 1, 750 | Reducer: | Worm - Right Angle |
| Series Code: | Raider | Product Type: | Worm Speed Reducer |
| Output RPM: | 29.1 | Center Distance (in): | 3.25 |
| Output Diameter (in): | 1.375 in | Service Factor: | 1 |
| Gear Type: | Worm | Frame Size: | 140TC |
| Input Diameter (in): | 0.875 in | Output Shaft Direction: | Right |
| Output Torque Rating (in-lb): | 3274 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.