- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q140R50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q140R50
$3,179.83
Out of stock
Out of stock
| Input Bore (C Face): | 0.875 | Shaft Seal Material: | Nitrile |
|---|---|---|---|
| Thrust Rating - output shaft: | 3410 | Reducer Style: | Standard |
| Ratio: | 50:1 | Motor Frame Size: | 140TC |
| Input Speed: | 1750 | Efficiency: | 80 |
| Input Keyway (C Face): | 3/16 X 3/32 | Series Code: | Raider |
| Input HP @ 1750 RPM: | 2.05 | Output RPM: | 35 |
| Service Factor: | 1 | Input Style: | C-Face Quill |
| Ratio Range: | 50:1 | Gear Type: | Worm |
| Mounting Style: | No Base | Reducer: | Worm - Right Angle |
| Assembly: | Q-R | Model Code: | 325Q |
| Input RPM: | 1, 75 | Output Diameter (in): | 1.375 in |
| Frame Size: | 140TC | Output Shaft Assembly Code: | R |
| Output Key: | 5/16 X 2.88 | No. of Gear Reductions: | Single |
| Product Type: | Worm Speed Reducer | Input Diameter (in): | 0.875 in |
| Center Distance (in): | 3.25 | Output Shaft Direction: | Right |
| Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb | Output Torque Rating (in-lb): | 3315 in-lbs @1750 input RPM in/lbs |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
6GWBPF1 159
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 159
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
Recently viewed
You haven't viewed at any of the products yet.