- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q140R40
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q140R40
$3,179.83
Out of stock
Out of stock
| Shaft Seal Material: | Nitrile | Input Keyway (C Face): | 3/16 X 3/32 |
|---|---|---|---|
| Input Speed: | 1750 | Thrust Rating - output shaft: | 3410 |
| Ratio: | 40:1 | Motor Frame Size: | 140TC |
| Input Bore (C Face): | 0.875 | Reducer Style: | Standard |
| Efficiency: | 80 | Center Distance (in): | 3.25 |
| Mounting Style: | No Base | Model Code: | 325Q |
| Series Code: | Raider | Ratio Range: | 40:1 |
| Service Factor: | 1 | No. of Gear Reductions: | Single |
| Output RPM: | 43.7 | Product Type: | Worm Speed Reducer |
| Output Diameter (in): | 1.375 in | Input RPM: | 1, 75 |
| Frame Size: | 140TC | Output Key: | 5/16 X 2.88 |
| Input Style: | C-Face Quill | Gear Type: | Worm |
| Input HP @ 1750 RPM: | 2.43 | Input Diameter (in): | 0.875 in |
| Reducer: | Worm - Right Angle | Output Shaft Assembly Code: | R |
| Assembly: | Q-R | Output Shaft Direction: | Right |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 2, 401 lb |
| Housing Material: | Cast Iron | Output Torque Rating (in-lb): | 3303 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 75.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
Recently viewed
You haven't viewed at any of the products yet.