- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
325Q140H60 200
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 325Q140H60 200
Out of stock
| Thrust Rating - output shaft: | 2574 | Ratio: | 60:1 |
|---|---|---|---|
| Input Keyway (C Face): | 3/16 X 1.63 | Efficiency: | 80 |
| Reducer Style: | Standard | Input Torque: | 76.13 in-Lbs @1750 input rpm, 1 HP |
| Input Speed: | 1750 | Motor Frame Size: | 140TC |
| Input Bore (C Face): | 0.63 | Input HP @ 1750 RPM: | 2.114 |
| Input Style: | C-Face Quill | Output Diameter (in): | 2.000 in |
| Frame Size: | 140TC | No. of Gear Reductions: | Single |
| Gear Type: | Worm | Center Distance (in): | 3.25 |
| Ratio Range: | 60:1 | Housing Material: | Cast Iron |
| Output Shaft: | Hollow Bore | Output Torque Rating (in-lb): | 29.1 in-Lbs @1750 input rpm, 1 HP in/lbs |
| Overhung Load Rating (Output Shaft(lb)): | 2, 275 lb | UPC: | 6, 62288E+11 |
| Weight: | 77.00 LB | Packaged Length: | 11.16 Inches |
| Packaged Width: | 7.88 Inches | Packaged Height: | 9.38 Inches |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
You haven't viewed at any of the products yet.