- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300ULR5
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300ULR5
$2,089.49
Out of stock
Out of stock
| Input Speed: | 1750 | Key Sq.: | 0.188 |
|---|---|---|---|
| Efficiency: | 80 | Key Length: | 1.31 |
| Shaft Seal Material: | Nitrile | Reducer Style: | Standard |
| Thrust Rating - output shaft: | 2692 | Ratio: | 5:1 |
| Manufacturer Reducer Size: | 300 | Maximum Input HP: | 8.25 hp @ 1750 rpm |
| Output Shaft Assembly Code: | D | Product Type: | Worm Speed Reducer |
| Series Code: | Raider | Output Key: | 1/4 X 2.25 |
| Center Distance (in): | 3 | Model Code: | 300U |
| Output RPM: | 350 | Service Factor: | 1 |
| Input HP @ 1750 RPM: | 9.46 | Gear Type: | Worm |
| Output Shaft Orientation: | LR | Mounting Style: | No Base |
| Input Diameter (in): | 0.875 in | Reducer: | Worm - Right Angle |
| No. of Gear Reductions: | Single | Output Diameter (in): | 1.250 in |
| Ratio Range: | 5:01 | Input RPM: | 1, 75 |
| Assembly: | U-LR | Input Style: | Solid Shaft |
| Input Keyway: | 3/16 X 1.31 in | Output Shaft Direction: | Double |
| Output Torque Rating (in-lb): | 1544 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 987 lb |
| UPC: | 6, 62288E+11 | Weight: | 64.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
Recently viewed
You haven't viewed at any of the products yet.