- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300UL50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300UL50
Out of stock
| Thrust Rating - output shaft: | 3410 | Efficiency: | 80 |
|---|---|---|---|
| Key Sq.: | 0.188 | Ratio: | 50:1 |
| Shaft Seal Material: | Nitrile | Key Length: | 1.31 |
| Reducer Style: | Standard | Input Speed: | 1750 |
| No. of Gear Reductions: | Single | Output Diameter (in): | 1.250 in |
| Service Factor: | 1 | Output Key: | 1/4 X 2.25 |
| Ratio Range: | 50:1 | Input HP @ 1750 RPM: | 1.64 |
| Output RPM: | 35 | Series Code: | Raider |
| Center Distance (in): | 3 | Gear Type: | Worm |
| Reducer: | Worm - Right Angle | Input RPM: | 1, 75 |
| Input Diameter (in): | 0.875 in | Assembly: | U-L |
| Product Type: | Worm Speed Reducer | Model Code: | 300U |
| Output Shaft Assembly Code: | L | Input Keyway: | 3/16 X 1.31 in |
| Input Style: | Solid Shaft | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 987 lb | Output Torque Rating (in-lb): | 2490 in-lbs @1750 input RPM in/lbs |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| UPC: | 6, 62288E+11 | Weight: | 64.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.