- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300UL20
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300UL20
$2,089.49
Out of stock
Out of stock
| Thrust Rating - output shaft: | 3410 | Ratio: | 20:1 |
|---|---|---|---|
| Input Speed: | 1750 | Reducer Style: | Standard |
| Efficiency: | 80 | Key Sq.: | 0.188 |
| Shaft Seal Material: | Nitrile | Key Length: | 1.31 |
| No. of Gear Reductions: | Single | Input Diameter (in): | 0.875 in |
| Center Distance (in): | 3 | Series Code: | Raider |
| Product Type: | Worm Speed Reducer | Service Factor: | 1 |
| Output Shaft Assembly Code: | L | Model Code: | 300U |
| Mounting Style: | No Base | Input RPM: | 1, 750 |
| Input Style: | Solid Shaft | Output Diameter (in): | 1.250 in |
| Gear Type: | Worm | Input Keyway: | 3/16 X 1.31 in |
| Reducer: | Worm - Right Angle | Assembly: | U-L |
| Output RPM: | 87.5 | Output Key: | 1/4 X 2.25 |
| Input HP @ 1750 RPM: | 3.6 | Ratio Range: | 20:01 |
| Output Shaft Direction: | Left | Housing Material: | Cast Iron |
| Overhung Load Rating (Output Shaft(lb)): | 987 lb | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 2454 in-lbs @1750 input RPM in/lbs | UPC: | 6, 62288E+11 |
| Weight: | 64.00 LB |
Related products
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
6GWPF1 17.6
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 17.6
Recently viewed
You haven't viewed at any of the products yet.