- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300UH15 115
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300UH15 115
Out of stock
| Input Torque: | 142.98 in-Lbs @1750 input rpm, 1 HP | Key Length: | 1.31 |
|---|---|---|---|
| Reducer Style: | Standard | Ratio: | 15:1 |
| Input Speed: | 1750 | Thrust Rating - output shaft: | 3410 |
| Efficiency: | 80 | Key Sq.: | 0.188 |
| No. of Gear Reductions: | Single | Input Style: | Shaft |
| Ratio Range: | 15:1 | Center Distance (in): | 3 |
| Gear Type: | Worm | Output Diameter (in): | 1.938 in |
| Input HP @ 1750 RPM: | 3.97 | Output Shaft: | Hollow Bore |
| Housing Material: | Cast Iron | Overhung Load Rating (Output Shaft(lb)): | 987 lb |
| Output Torque Rating (in-lb): | 116.6 in-Lbs @1750 input rpm, 1 HP in/lbs | UPC: | 6, 62288E+11 |
| Weight: | 65.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.