- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300Q180R30
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300Q180R30
Out of stock
| Efficiency: | 80 | Thrust Rating - output shaft: | 3410 |
|---|---|---|---|
| Ratio: | 30:1 | Shaft Seal Material: | Nitrile |
| Input Speed: | 1750 | Input Bore (C Face): | 1.125 |
| Motor Frame Size: | 180TC | Input Keyway (C Face): | 1/4 X 1/8 |
| Reducer Style: | Standard | Maximum Input HP: | 2.88 hp @ 1750 rpm |
| Manufacturer Reducer Size: | 300 | Output Shaft Assembly Code: | R |
| Product Type: | Worm Speed Reducer | Gear Type: | Worm |
| Reducer: | Worm - Right Angle | No. of Gear Reductions: | Single |
| Series Code: | Raider | Ratio Range: | 30:1 |
| Center Distance (in): | 3 | Input HP @ 1750 RPM: | 2.63 |
| Output RPM: | 58.3 | Frame Size: | 180TC |
| Assembly: | Q-R | Output Key: | 1/4 X 2.25 |
| Input Style: | C-Face Quill | Mounting Style: | No Base |
| Model Code: | 300Q | Input Diameter (in): | 1.125 in |
| Input RPM: | 1, 75 | Output Diameter (in): | 1.250 in |
| Service Factor: | 1 | Output Shaft Direction: | Right |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 987 lb |
| Output Torque Rating (in-lb): | 2519 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 68.00 LB |
Related products
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
Recently viewed
You haven't viewed at any of the products yet.