- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
300Q180L40
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 300Q180L40
$2,328.21
Out of stock
Out of stock
| Ratio: | 40:1 | Efficiency: | 80 |
|---|---|---|---|
| Input Keyway (C Face): | 1/4 X 1/8 | Motor Frame Size: | 180TC |
| Input Bore (C Face): | 1.125 | Thrust Rating - output shaft: | 3410 |
| Reducer Style: | Standard | Shaft Seal Material: | Nitrile |
| Input Speed: | 1750 | Maximum Input HP: | 2.25 hp @ 1750 rpm |
| Manufacturer Reducer Size: | 300 | Reducer: | Worm - Right Angle |
| Product Type: | Worm Speed Reducer | Output RPM: | 43.7 |
| Input Diameter (in): | 1.125 in | Frame Size: | 180TC |
| Assembly: | Q-L | Output Shaft Assembly Code: | L |
| Output Key: | 1/4 X 2.25 | Input Style: | C-Face Quill |
| Input RPM: | 1, 75 | Mounting Style: | No Base |
| Ratio Range: | 40:01:00 | No. of Gear Reductions: | Single |
| Output Diameter (in): | 1.250 in | Gear Type: | Worm |
| Input HP @ 1750 RPM: | 2.04 | Model Code: | 300Q |
| Center Distance (in): | 3 | Service Factor: | 1 |
| Series Code: | Raider | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 987 lb | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 2477 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 68.00 LB |
Related products
6GWBPF1 159
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 159
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
Recently viewed
You haven't viewed at any of the products yet.