- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
262UR60
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262UR60
$1,622.79
Out of stock
Out of stock
| Input Speed: | 1750 | Ratio: | 60:1 |
|---|---|---|---|
| Efficiency: | 80 | Key Sq.: | 0.188 |
| Thrust Rating - output shaft: | 3410 | Reducer Style: | Standard |
| Shaft Seal Material: | Nitrile | Key Length: | 1.63 |
| Maximum Input HP: | 1.216 hp @ 1750 rpm | Manufacturer Reducer Size: | 262 |
| Input HP @ 1750 RPM: | 0.91 | Reducer: | Worm - Right Angle |
| Output Diameter (in): | 1.125 in | Input RPM: | 1, 750 |
| Center Distance (in): | 2.63 | Gear Type: | Worm |
| Service Factor: | 1 | Product Type: | Worm Speed Reducer |
| Output Shaft Assembly Code: | R | Ratio Range: | 60:01:00 |
| Mounting Style: | No Base | No. of Gear Reductions: | Single |
| Series Code: | Raider | Output Key: | 1/4 X 2.00 |
| Input Style: | Solid Shaft | Input Keyway: | 3/16 X 1.88 in |
| Input Diameter (in): | 0.75 in | Model Code: | 262U |
| Output RPM: | 29.1 | Assembly: | U-R |
| Output Shaft Direction: | Right | Output Torque Rating (in-lb): | 1805 in-lbs @1750 input RPM in/lbs |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 1, 295 lb |
| Housing Material: | Cast Iron | UPC: | 6, 62288E+11 |
| Weight: | 52.00 LB |
Related products
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.