- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
262UR10
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262UR10
$1,622.79
Out of stock
Out of stock
| Key Length: | 1.63 | Reducer Style: | Standard |
|---|---|---|---|
| Thrust Rating - output shaft: | 1976 | Shaft Seal Material: | Nitrile |
| Input Speed: | 1750 | Ratio: | 10:1 |
| Efficiency: | 80 | Key Sq.: | 0.188 |
| Input RPM: | 1, 750 | Gear Type: | Worm |
| Output Diameter (in): | 1.125 in | Product Type: | Worm Speed Reducer |
| No. of Gear Reductions: | Single | Model Code: | 262U |
| Output Shaft Assembly Code: | R | Series Code: | Raider |
| Ratio Range: | 10:1 | Assembly: | U-R |
| Output Key: | 1/4 X 2.00 | Input HP @ 1750 RPM: | 4.07 |
| Center Distance (in): | 2.63 | Input Keyway: | 3/16 X 1.88 in |
| Service Factor: | 1 | Reducer: | Worm - Right Angle |
| Input Diameter (in): | 0.75 in | Output RPM: | 175 |
| Mounting Style: | No Base | Input Style: | Solid Shaft |
| Output Shaft Direction: | Right | Output Torque Rating (in-lb): | 1475 in-lbs @1750 input RPM in/lbs |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)): | 1, 295 lb | UPC: | 6, 62288E+11 |
| Weight: | 52.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
6GWBPF1 57
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 57
Recently viewed
You haven't viewed at any of the products yet.