- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
262UL50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262UL50
$1,622.79
Out of stock
Out of stock
| Reducer Style: | Standard | Input Speed: | 1750 |
|---|---|---|---|
| Ratio: | 50:1 | Key Length: | 1.63 |
| Key Sq.: | 0.188 | Efficiency: | 80 |
| Thrust Rating - output shaft: | 3336 | Shaft Seal Material: | Nitrile |
| Input HP @ 1750 RPM: | 1.1 | Output RPM: | 35 |
| Center Distance (in): | 2.63 | Product Type: | Worm Speed Reducer |
| Mounting Style: | No Base | Output Key: | 1/4 X 2.00 |
| Output Diameter (in): | 1.125 in | Input RPM: | 1, 750 |
| No. of Gear Reductions: | Single | Input Style: | Solid Shaft |
| Reducer: | Worm - Right Angle | Output Shaft Assembly Code: | L |
| Model Code: | 262U | Input Diameter (in): | 0.75 in |
| Input Keyway: | 3/16 X 1.88 in | Assembly: | U-L |
| Ratio Range: | 50:01:00 | Gear Type: | Worm |
| Service Factor: | 1 | Series Code: | Raider |
| Output Shaft Direction: | Left | Overhung Load Rating (Output Shaft(lb)): | 1, 295 lb |
| Output Torque Rating (in-lb): | 1843 in-lbs @1750 input RPM in/lbs | Output Shaft: | Solid Shaft |
| Housing Material: | Cast Iron | UPC: | 6, 62288E+11 |
| Weight: | 52.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.