- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
237UH50 104
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237UH50 104
Out of stock
| Ratio: | 50:1 | Thrust Rating - output shaft: | 2091 |
|---|---|---|---|
| Key Length: | 1.63 | Efficiency: | 80 |
| Input Torque: | 41.06 in-Lbs @1750 input rpm, 1 HP | Input Speed: | 1750 |
| Reducer Style: | Standard | Key Sq.: | 0.188 |
| Output Diameter (in): | 1.250 in | Input HP @ 1750 RPM: | 1.14 |
| Input Style: | Shaft | No. of Gear Reductions: | Single |
| Center Distance (in): | 2.38 | Gear Type: | Worm |
| Ratio Range: | 50:1 | Overhung Load Rating (Output Shaft(lb)): | 1, 770 lb |
| Output Shaft: | Hollow Bore | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 35 in-Lbs @1750 input rpm, 1 HP in/lbs | UPC: | 6, 62288E+11 |
| Weight: | 42.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.