- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
237Q56H40 107
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56H40 107
$1,770.50
Out of stock
Out of stock
| Motor Frame Size: | 56C | Efficiency: | 80 |
|---|---|---|---|
| Ratio: | 40:1 | Input Bore (C Face): | 0.625 |
| Thrust Rating - output shaft: | 2091 | Input Speed: | 1750 |
| Reducer Style: | Standard | Input Keyway (C Face): | 3/16 x 3/32 |
| Frame Size: | 56C | Center Distance (in): | 2.38 |
| Ratio Range: | 40:1 | Product Type: | Worm Speed Reducer |
| Input HP @ 1750 RPM: | 1.34 | Service Factor: | 1 |
| No. of Gear Reductions: | Single | Mounting Style: | Shaft Mt |
| Output Diameter (in): | 1.500 in | Input Diameter (in): | 0.625 in |
| Series Code: | Raider | Input Style: | C-Face Quill |
| Gear Type: | Worm | Output Shaft Direction: | L or R |
| Overhung Load Rating (Output Shaft(lb)): | 1, 770 lb | Output Torque Rating (in-lb): | 1433 in-lbs @1750 input RPM in/lbs |
| Housing Material: | Cast Iron | Output Shaft: | Hollow Bore |
| UPC: | 6, 62289E+11 | Weight: | 33.00 LB |
| Packaged Length: | 10.69 Inches | Packaged Width: | 9.06 Inches |
| Packaged Height: | 10.5 Inches |
Related products
6GWBPF1 25.4
$2,775.20More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 25.4
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
6GWBPF1 31
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 31
Recently viewed
Out of stock
Out of stock
