- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
206UR5
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206UR5
$1,245.15
Out of stock
Out of stock
| Key Sq.: | 0.1875 | Efficiency: | 80 |
|---|---|---|---|
| Input Speed: | 1750 | Key Length: | 1.38 |
| Ratio: | 5:1 | Reducer Style: | Standard |
| Shaft Seal Material: | Nitrile | Thrust Rating - output shaft: | 1265 |
| Center Distance (in): | 2.06 | Series Code: | Raider |
| Input Keyway: | 3/16 X 1.50 in | Reducer: | Worm - Right Angle |
| Model Code: | 206U | Mounting Style: | No Base |
| Assembly: | U-R | Ratio Range: | 5:1 |
| Input HP @ 1750 RPM: | 3.5 | Output Shaft Assembly Code: | R |
| Output Diameter (in): | 1.000 in | Product Type: | Worm Speed Reducer |
| Output Key: | 1/4 X 1.75 | Input RPM: | 1, 75 |
| Gear Type: | Worm | Input Style: | Solid Shaft |
| Output RPM: | 350 | Service Factor: | 1 |
| Input Diameter (in): | 0.625 in | No. of Gear Reductions: | Single |
| Output Shaft Direction: | Right | Overhung Load Rating (Output Shaft(lb)): | 913 lb |
| Output Shaft: | Solid Shaft | Housing Material: | Cast Iron |
| Output Torque Rating (in-lb): | 614 in-lbs @1750 input RPM in/lbs | UPC: | 6, 62288E+11 |
| Weight: | 25.59 LB | Packaged Length: | 15 Inches |
| Packaged Width: | 11.5 Inches | Packaged Height: | 11.8 Inches |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
206Q56H30 107
$1,472.38More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56H30 107
Recently viewed
Out of stock
Out of stock
Out of stock
Out of stock
