- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
206Q56R50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56R50
$1,300.03
Out of stock
Out of stock
| Input Speed: | 1750 | Input Bore (C Face): | 0.625 |
|---|---|---|---|
| Reducer Style: | Standard | Input Keyway (C Face): | 3/16 X 3/32 |
| Shaft Seal Material: | Nitrile | Efficiency: | 80 |
| Thrust Rating - output shaft: | 2305 | Motor Frame Size: | 56C |
| Ratio: | 50:1 | Assembly: | Q-R |
| Reducer: | Worm - Right Angle | Mounting Style: | No Base |
| No. of Gear Reductions: | Single | Frame Size: | 56C |
| Input Diameter (in): | 0.625 in | Output Shaft Assembly Code: | R |
| Input RPM: | 1, 750 | Output Key: | 1/4 X 1.75 |
| Series Code: | Raider | Center Distance (in): | 2.06 |
| Output RPM: | 35 | Input HP @ 1750 RPM: | 0.62 |
| Output Diameter (in): | 1.000 in | Ratio Range: | 50:01:00 |
| Product Type: | Worm Speed Reducer | Service Factor: | 1 |
| Input Style: | C-Face Quill | Gear Type: | Worm |
| Model Code: | 206Q | Output Shaft Direction: | Right |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 1, 078 lb |
| Output Torque Rating (in-lb): | 970 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 29.00 LB |
Related products
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
Recently viewed
Out of stock
