- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
206Q56L5
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 206Q56L5
$1,318.18
Out of stock
Out of stock
| Ratio: | 5:1 | Thrust Rating - output shaft: | 1265 |
|---|---|---|---|
| Motor Frame Size: | 56C | Reducer Style: | Standard |
| Input Bore (C Face): | 0.625 | Input Keyway (C Face): | 3/16 X 3/32 |
| Shaft Seal Material: | Nitrile | Efficiency: | 80 |
| Input Speed: | 1750 | Output Diameter (in): | 1.000 in |
| Product Type: | Worm Speed Reducer | Series Code: | Raider |
| Ratio Range: | 5:1 | Input HP @ 1750 RPM: | 3.5 |
| Model Code: | 206Q | Reducer: | Worm - Right Angle |
| Output Key: | 1/4 X 1.75 | Center Distance (in): | 2.06 |
| Input RPM: | 1, 750 | Frame Size: | 56C |
| Output Shaft Assembly Code: | L | Output RPM: | 350 |
| Input Style: | C-Face Quill | Service Factor: | 1 |
| Gear Type: | Worm | No. of Gear Reductions: | Single |
| Assembly: | Q-L | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 913 lb | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 614 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 29.00 LB |
Related products
262Q140H30 115
$2,146.21More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H30 115
262Q140H10 115
$2,176.15More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 262Q140H10 115
Recently viewed
You haven't viewed at any of the products yet.