- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175ULR50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175ULR50
$1,045.64
Out of stock
Out of stock
| Efficiency: | 80 | Key Sq.: | 0.1875 |
|---|---|---|---|
| Ratio: | 50:1 | Thrust Rating - output shaft: | 1399 |
| Key Length: | 1.38 | Input Speed: | 1750 |
| Shaft Seal Material: | Nitrile | Reducer Style: | Standard |
| Maximum Input HP: | 0.52 hp @ 1750 rpm | Manufacturer Reducer Size: | 175 |
| Reducer: | Worm - Right Angle | Input Style: | Solid Shaft |
| Series Code: | Raider | Ratio Range: | 50:1 |
| Model Code: | 175U | Service Factor: | 1 |
| Output RPM: | 35 | Input Diameter (in): | 0.625 in |
| No. of Gear Reductions: | Single | Input HP @ 1750 RPM: | 0.41 |
| Mounting Style: | No Base | Gear Type: | Worm |
| Assembly: | U-LR | Output Diameter (in): | 0.875 in |
| Input Keyway: | 3/16 X 1.50 in | Center Distance (in): | 1.75 |
| Output Shaft Orientation: | LR | Input RPM: | 1, 75 |
| Output Key: | 3/16 X 1.38 | Product Type: | Worm Speed Reducer |
| Output Shaft Assembly Code: | D | Output Shaft Direction: | Double |
| Housing Material: | Cast Iron | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 634 in-lbs @1750 input RPM in/lbs | Overhung Load Rating (Output Shaft(lb)): | 740 lb |
| UPC: | 6, 62289E+11 | Weight: | 20.00 LB |
Related products
175Q56H15 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H15 100
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
Recently viewed
You haven't viewed at any of the products yet.