- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175Q56R50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56R50
$1,085.71
Out of stock
Out of stock
| Input Keyway (C Face): | 3/16 X 3/32 | Reducer Style: | Standard |
|---|---|---|---|
| Input Speed: | 1750 | Efficiency: | 80 |
| Thrust Rating - output shaft: | 1399 | Ratio: | 50:1 |
| Shaft Seal Material: | Nitrile | Motor Frame Size: | 56C |
| Input Bore (C Face): | 0.625 | Assembly: | Q-R |
| Mounting Style: | No Base | Input HP @ 1750 RPM: | 0.41 |
| Output Shaft Assembly Code: | R | Output RPM: | 35 |
| Series Code: | Raider | Product Type: | Worm Speed Reducer |
| Gear Type: | Worm | Ratio Range: | 50:1 |
| Output Diameter (in): | 0.875 in | No. of Gear Reductions: | Single |
| Input RPM: | 1, 75 | Service Factor: | 1 |
| Input Diameter (in): | 0.625 in | Center Distance (in): | 1.75 |
| Input Style: | C-Face Quill | Reducer: | Worm - Right Angle |
| Model Code: | 175Q | Output Key: | 3/16 X 1.38 |
| Frame Size: | 56C | Output Shaft Direction: | Right |
| Housing Material: | Cast Iron | Output Torque Rating (in-lb): | 634 in-lbs @1750 input RPM in/lbs |
| Output Shaft: | Solid Shaft | Overhung Load Rating (Output Shaft(lb)): | 740 lb |
| UPC: | 6, 62288E+11 | Weight: | 24.00 LB |
Related products
237Q56LR30
$1,254.86More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 237Q56LR30
175Q56H10 100
$1,238.13More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56H10 100
