- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175Q56R10
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56R10
$1,085.71
Out of stock
Out of stock
| Input Keyway (C Face): | 3/16 X 3/32 | Efficiency: | 80 |
|---|---|---|---|
| Reducer Style: | Standard | Input Bore (C Face): | 0.625 |
| Thrust Rating - output shaft: | 1098 | Shaft Seal Material: | Nitrile |
| Motor Frame Size: | 56C | Input Speed: | 1750 |
| Ratio: | 10:1 | Output Diameter (in): | 0.875 in |
| Frame Size: | 56C | Gear Type: | Worm |
| Output Shaft Assembly Code: | R | Input Diameter (in): | 0.625 in |
| Output RPM: | 175 | Mounting Style: | No Base |
| Output Key: | 3/16 X 1.38 | Input HP @ 1750 RPM: | 1.52 |
| Model Code: | 175Q | No. of Gear Reductions: | Single |
| Ratio Range: | 10:01 | Center Distance (in): | 1.75 |
| Reducer: | Worm - Right Angle | Input RPM: | 1, 75 |
| Input Style: | C-Face Quill | Series Code: | Raider |
| Assembly: | Q-R | Service Factor: | 1 |
| Product Type: | Worm Speed Reducer | Output Shaft Direction: | Right |
| Overhung Load Rating (Output Shaft(lb)): | 740 lb | Output Shaft: | Solid Shaft |
| Output Torque Rating (in-lb): | 528 in-lbs @1750 input RPM in/lbs | Housing Material: | Cast Iron |
| UPC: | 6, 62288E+11 | Weight: | 24.00 LB |
Related products
133Q56H25 010
$1,206.20More InfoMorse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 133Q56H25 010
6GWPF1 11.25
$1,481.80More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Single-Reduction Worm Reducer – 6GWPF1 11.25
Recently viewed
You haven't viewed at any of the products yet.