- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
175Q56L5
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer – 175Q56L5
$1,100.86
Out of stock
Out of stock
| Shaft Seal Material: | Nitrile | Ratio: | 5:1 |
|---|---|---|---|
| Input Keyway (C Face): | 3/16 X 3/32 | Input Bore (C Face): | 0.625 |
| Efficiency: | 80 | Thrust Rating - output shaft: | 868 |
| Input Speed: | 1750 | Reducer Style: | Standard |
| Motor Frame Size: | 56C | Product Type: | Worm Speed Reducer |
| Reducer: | Worm - Right Angle | Input Style: | C-Face Quill |
| Gear Type: | Worm | Output RPM: | 350 |
| Ratio Range: | 5:1 | Service Factor: | 1 |
| Frame Size: | 56C | Input Diameter (in): | 0.625 in |
| Output Shaft Assembly Code: | L | Series Code: | Raider |
| No. of Gear Reductions: | Single | Input RPM: | 1, 75 |
| Mounting Style: | No Base | Input HP @ 1750 RPM: | 2.45 |
| Model Code: | 175Q | Center Distance (in): | 1.75 |
| Assembly: | Q-L | Output Key: | 3/16 X 1.38 |
| Output Diameter (in): | 0.875 in | Output Shaft Direction: | Left |
| Overhung Load Rating (Output Shaft(lb)): | 663 lb | Output Shaft: | Solid Shaft |
| Housing Material: | Cast Iron | Output Torque Rating (in-lb): | 436 in-lbs @1750 input RPM in/lbs |
| UPC: | 6, 62288E+11 | Weight: | 24.00 LB |
Related products
6GWBPF1 191
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 191
6GWBPF1 31
$2,713.81More InfoBrowning IRA-Industrial Right Angle Worm Gear Reducers Double-Reduction Worm-Helical Reducer – 6GWBPF1 31
Recently viewed
You haven't viewed at any of the products yet.